2019 X384 John Deere Lawn Tractor
22Hp Gas engine
All wheel Steer
48" Deck
Bagger w/ Power flow
Extra Nice w/ only 128hrs
$4995
22Hp Gas engine
All wheel Steer
48" Deck
Bagger w/ Power flow
Extra Nice w/ only 128hrs
$4995
- 2019
- John Deere
- X384
- Base
- Riding
- Model: FS651V
- Overhead valve, full-pressure lube, oil filter
- 22 hp (16.4 kW)
- 44.3 cu in. (726 cc)
- V-twin, cast-iron liners
- Mechanical
- Separate levers, automatic choke return
- Air
- Dry, replaceable with foam precleaner
- Transaxle: Internal, not replaceable
- Gasoline
- Delivery: Pulse pump, carburetor
- Gauge on dash
- Manual, sector and pinion
- Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
- Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | All-wheel steer | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
- Internal wet disc
- Cast iron front axle, front wheel ball bearings
- 15x6-6
- 20x10-10
- Mower: Four | Mower, adjustment: Seven-position, spring-loaded pin | Mower, rotate: 90 degrees for easy mower removal
- 12 V (340 CCA)
- Flywheel alternator, regulated, 15 amp
- Engine: Bendix
- Transaxle Forward speed: 0-5.9 mph (0-9.5 km/h) | Transaxle Reverse speed: 0-3.5 mph (0-5.6 km/h)
- Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
- Welded heavy-duty
- Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 9 in. (22.9 cm)
- 72 in. (182.9 cm)
- 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
- With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
- 49.4 in. (125.5 cm)
- 48 in. (122 cm)
- Steering: 15 in. (38.1 cm)
- Back: 15 in. (38.1 cm)
- Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
- Large: 14 in. (35.6 cm)
- Tank: 3.3 U.S. gal. (12.5 L)
- Mower, no fuel: 700 lb (318 kg)
- Two standard, incandescent, 27 W
- Meets ANSI standard | Meets OPEI standard | Safety video
- Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
- Type: Foot pedal with adjustable spring assist
- Hood: Molded-in color hood material reduces sound, will not rust or dent
- Fender: Stamped steel | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
- 13 positions
- 4 year/300 hour bumper-to-bumper
- $4,995.00
- Newton, North Carolina
- Pre-Owned
- CONSIGNMENT
- 2019
- John Deere
- X384
- Model: FS651V
- 22
- 128
- Equipment mounting: heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
- Gas
- Available
- With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
- 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)